Waste incineration examples: incineration system (1) the furnace body furnace body is composed of refractory, insulation materials, insulation materials masonry cavity in the upper grate, flue gas leakage in case of outsourcing steel surface of the body and the furnace temperature is less than 50 ℃ . In the furnace side of the body has the access door, the auxiliary ignition burner side also. Furnace body is provided with the console. Scouring material in the furnace flue gas from the bottom up, the material in the water drying, the material timely fire. And around the arch and radiation heat storage refractory materials, thus ensuring the material combustion temperature. Extend the residence time of the flue gas, the material and fly ash complete combustion of organic matter, increase the rate of destruction of harmful substances. Furnace body at a high temperature refractory material lining, the middle is insulation material, the outer layer is the insulation material, the furnace body can reduce heat loss and improve combustion efficiency; appearance with steel as a protective layer to prevent leakage; refractories used in Division I Building Materials Science Research Institute and co-development of a flue gas acid resistance to corrosion, high temperature, high strength refractory. (2) factors that affect the performance of the incinerator as an incineration system, the most important indicator is the rate of incineration to destroy harmful substances, affecting the rate of destruction has the following main factors: the burning temperature, residence time, turbulence and excess air factor. 1 incineration temperature is the temperature incineration of hazardous waste components at a high temperature oxidation, decomposition, destruction until the temperature reached. Generally improve waste incineration temperature favors the destruction of harmful substances and can inhibit the generation of black smoke, but the temperature is too high not only increase fuel consumption, but also increased the content of nitrogen oxides in the flue gas. Therefore, under the premise to ensure the destruction rate appropriate temperature is more reasonable. Waste harmful microbes in about 70 ~ 100 ℃ most can not survive, treatment is generally short-chain organic incineration temperature of 700 ~ 800 ℃, so in this scenario, the furnace temperature to meet the temperature incineration of such waste. 2 residence time residence time is the occurrence of harmful components of waste incineration conditions under oxidative decomposition, the time required to finalize harmless substance, destruction rate directly affects the length of the residence time of incineration, but also determines the specific dimensions of the furnace. Many factors affect the retention time, such as incineration temperature, excess air ratio and air are mixed in the oven with the degree of waste. In order to ensure full decomposition of waste and combustion products, waste incinerator in about 600 ℃ to stay for about one hour. 

keywords: Incinerator offer, incinerator manufacturers, waste incinerators Which is good,